EU Technical Equivalence Assessment (TE): About Specifications


China has always been a major exporter of pesticide technical materials. The most convenient way for pesticide technical materials to enter the European market is to apply for Technical Equivalence (TE) Assessments.

REACH24H, based on our experience in assisting companies with TE applications, found that many companies are still not familiar with how technical specifications are determined in TE. Hence, this article summarizes some common questions for companies interested in TE applications.


01: How to get the specifications for European Union (EU) reference sources?

The TE assesses whether the technical materials of companies are equivalent to the reference source of the EU. Therefore, before applying for the TE assessment, it is necessary to have a comprehensive understanding of the specifications of the reference sources.

The COMMISSION IMPLEMENTING REGULATION (EU) No 540/2011 (No. 540/2011) is a dynamically updated list of EU-approved active substances, renewed every 1-2 months. You can check the specifications of the reference source of active substances you are interested in through the official website.

What calls for special attention is that only the limits of active substances and relevant impurities are disclosed in the No. 540/2011 list, while the specifications of other significant impurities are confidential information only accessible to officials and will not be disclosed to the industry.

Take Fluroxypyr as an example, you can find its EU reference source active substance specifications, the specifications of relevant impurities, the authorized expiration date, etc. in the No. 540/2011 list.

However, the description of specifications in No. 540/2011 is generally brief, and further detailed specifications can be found in the official evaluation report, etc. For example, some technical materials are composed of different isomers, while the specific configuration of the isomers, the composition of the isomers, the requirements for limit values, etc., are generally not included in the No. 540/2011 list.


REACH24H tips:

If a company does not understand these detailed specifications, its TE application may be rejected.

REACH24H recommends that companies make detailed research on the specifications of the EU reference source before applying for TE, and evaluate whether your products meet the specifications of the reference source (public part).


02: How does the EU set the specifications of new sources?

One situation we often encounter is that the company is unwilling to accept the official revision on specifications during the TE assessment, mostly because the specifications after revision are too strict, which cannot be realized in actual production.

So how to avoid such a situation?

The first thing is to understand how the EU sets the specifications for new sources. The main requirements for setting the specifications of chemical pesticide technical materials in EU regulations are as follows:

  1. Perform statistical analysis on the results of the five batches, generally including the maximum value, minimum value, average value, standard deviation, etc. In practice, the average value with ± 3 standard deviations is generally used to determine specification limits for active substances and impurities.
  2. Applicants may provide additional data to support setting the specifications.


EU sets the specifications mainly based on the results of the five batch reports, i.e., after the companies submit five batches of samples to the laboratory, and the laboratory gives the test results, the specifications of the technical materials are basically determined.

If the applicant does not agree with the specifications set by the above rules, the EU opens another path for them - to provide supplementary data to support setting the specifications. But there is also a risk. If the supplementary data provided by the company differ significantly from the results of the five batches, the official may request to reschedule the five batches’ tests.


REACH24H tips:

From a practical point of view, the EU mainly sets specifications based on five batches reports at present. There are some risks in using supplemental data to support specification revisions.

REACH24H suggests that companies can consider the follow-up specification problems in advance when they carry out five batches reports, so as to avoid nonconformity with the official requirements, or inability to produce compliant products, which will cause unnecessary loss to the companies.


03: Common issues in practice.

Q1: Can I set the specification of the relevant impurities of my technical materials the same as the reference source? — Company A

A1: Since launching the TE projects in 2016, the requirements of the EU for specifications are becoming more and more stringent. For example, a few years ago, the official may accept consistent specifications of relevant impurities with the reference source, but in recent years, the official feedback we have received basically requires that the specifications should be set according to the data of five batches, which is actually closer to the requirements of the regulations.

As analyzed above, the EU specifications are mainly set based on five batches. In actual operation, the limit of relevant impurities in the reference sources is the maximum value, and the actual specifications of the companies are determined by the specific statistical data of the relevant impurities in the five batches.

The more common situation is that the limit of relevant impurity A of the technical materials of the company is less than LOQ, or less than LOD. In practice, the official is likely to require the company to set the limit at the LOQ instead of keeping it consistent with the reference source.


Q2: Can I select batches with higher technical quality for five batches in order to pass the TE? —Company B

A2: As analyzed above, the quality of the five batches of samples submitted by the company for testing actually determines the specifications of the technical materials. If a company chooses a batch with higher technical quality for five batches analysis, it needs to consider whether the products actually produced can meet the technical requirements of the five batches report.


Q3: The substance is undergoing re-evaluation. In order to avoid specification changes after the renewal, do I need to wait until the renewal passes to apply for TE? —Company C

A3: This question is of great concern to many companies. There are many active substances currently undergoing the EU renewal

Due to the huge workload of plant protection products review, the EU renewal cycle of substances has been extended again and again. The renewal that is theoretically completed in 3 years may be delayed to 5 years, or even nearly 10 years.

Considering the time cost of waiting, and the relatively low probability of specifications changing, we generally recommend companies to apply for TE directly. Companies can also make the most favorable choice based on their own circumstances.

To access the expert article, you need to Subscribe Standard/Corporate membership. Click here to upgrade your membership today. Or apply our 14-Day Free Trial.

Something Wrong? At Chemlinked we do our utmost to provide you with accurate information. However sometimes errors slip under the radar, we’re only human. That’s where you our vigilant reader come in! If you notice any errors contact us on: Budding Journalist ? Send us your news on: